FXC Inc.
JapanChina
 
homeproductsabout fxccontact us
Products
     
  home > products > MC201 Smart Series  
     
 

MC201 Smart Series
10BASE-T/100BASE-TX to 100BASE-FX Smart Media Converter

MC200 Smart Media ConverterMC201FMSC
10BASE-T/100BASE-TX to 100BASE-FX(SC, MMF) Smart Media Converter

MC201FSSC15

10BASE-T/100BASE-TX to 100BASE-FX(SC, SMF-15) Smart Media Converter

MC201FSSC60

10BASE-T/100BASE-TX to 100BASE-FX(SC, SMF-60) Smart Media Converter

MC200 Series Smart Media Converter is a media converter with Link Forwarding feature that converts 10BASE-T/100BASE-TX and 100BASE-FX.
100BASE-FX is available in a multi-mode model that has transmission distance of 2km, and a single mode model that has transmission distance of 15km and 60km. With Link Forwarding, trunking between switches is available.
Each product can be used both as a stand alone device and a rack mountable device by pulling out from its case. With the rack, it supports dual power supply and SNMP management.

Features
   
Link Forwarding
10BASE-T/100BASE-TX to 100BASE-FX Media Converter
Available in 3 models, MMF2km, SMF15km, and 60km
MDI/MDI-X Auto Switching, Auto Negotiation Supported(10BASE-T/100BASE-TX Port)
Rack Mount Chassis (sold separately) can be attached
Small AC Adapter
 
     
  Link Forwarding
When there's a problem in Media Converter fiber or UTP port, Link Forwarding brings down the other link. It enables using spanning tree feature connected to Media Converter, or generating error report by SNMP and RMON. Also, Media Converter with Link Forwarding feature can be connected to trunking connection between switches.
 
     
 
Specification: MC201FMSC
Standards
IEEE802.3, IEEE802.3u
Data Transfer Speed
10/100Mbps(CSMA/CD)
10BASE-T/
100BASE-TX Port
10BASE-T/100BASE-TX(MDI/MDI-X auto switch)
Duplex Full/Half
Auto Negotiation Supported(Transfer Speed, Full/Half Duplex Configurable)
100BASE-FX Port

100BASE-FX(MMF 2.0km)
Duplex Full/Half switch-able
Wavelength 1300nm
Output -20dBm min.
Receiving Sensitivity -31dBm max.
Cables
10BASE-T UTP Category 3 and up
100BASE-TX UTP Category 5 and up
100BASE-FX MMF: 50/125m, 62.5/125m


Specification: MC201FSSC15
Standards
IEEE802.3, IEEE802.3u
Data Transfer Speed
10/100Mbps(CSMA/CD)
10BASE-TX Ports
10BASE-T/100BASE-TX(MDI/MDI-X auto switch)
Duplex Full/Half
Auto Negotiation Supported (Transfer Speed, Full/Half Duplex Configurable)
P100BASE-FX Ports
(SC Connector)
100BASE-FX(SMF 15km)
Duplex Full/Half switch-able
Wavelength 1300nm
Output -15dBm min.
Receiving Sensitivity -31dBm max.
Cables
10BASE-T UTP Category 3 and up
100BASE-TX UTP Category 5 and up
100BASE-FX SMF: 9/125m


Specification: MC201FSSC60
Standards
IEEE802.3, IEEE802.3u
Data Transfer Speed
10/100Mbps(CSMA/CD)
10BASE-TX Ports
10BASE-T/100BASE-TX(MDI/MDI-X auto switch)
Duplex Full/Half
Auto Negotiation Supported
100BASE-FX Ports
(SC Connector)
100BASE-FX(SMF 60km)
Duplex Full/Half switch-able
Wavelength 1300nm
Output -5dBm min.
Receiving Sensitivity -34dBm max.
Cables
10BASE-T UTP Category 3 and up
100BASE-TX UTP Category 5 and up
100BASE-FX SMF: 9/125m


Common Specification: MC201FSSC/MC201FSSC15/MC201FSSC60
Features
Link Forwarding Link Forwarding (ON/OFF)
Transmission System Bridge
LED Display
Main Unit Power (Green)
Ports Link/Act (Green), FDX (Green), FAIL (Green) 100M (Green) (10BASE-T/100BASE-TX Port only)
Power
Voltage Required
/Power Provided
AC100V, 50/60Hz
Max. Input 0.5A
Max. Power Consumption 5.0W
Max. Calorific Value 4.3Kcal/h
Required Humidity and Temp.
During Operation 0°C -40°C/10% - 90% Non-Condensing
During Non-Operation -40°C -70°C/Lower than 90% Non-Condensing
Size
88mm(W) x 120mm(D) x 25mm(H) ) *not including projection
Weight
305g *not including AC adapter
Standards
EMI Standard VCCI Class B
Supplies
AC Adapter, 4 Rubber Buttons, Code Cramp, User Manual, Product Guarantee


::: Option :::
OPT-SW03
Magnetic SW03

page top

 

: products : about fxc : contact us :